Product Bulletin |
STAT-VAC KITS |
|
|
STAT-VAC Conductive Vacuum Hose is now offered in complete, ready to install retrofit kits.
The Kits include pre-cut lengths of hose, manifold adaptors, and tie wraps. STAT-VAC Kits are
available for most Excellon systems, including Mark III, Mark IV, Mark V, and the new Mark VI.
Also, STAT-V AC Kits are adaptable for installation on most multi-spindle drilling and routing
machines including Advanced Control's Trudril® Hitachi, Klingelberg, and Pluritec.
The electrical conductivity of STAT-VAC Hose is achieved through a conductive coating
applied both the entire outside surface and the inner surface on the ends of each tube.
The STAT-VAC processing demands that STAT-VAC be sold exclusively in kit form.
|
|
To order STAT-VAC Kits for machines other than Excellon, specify the O.D. of the male connector
at the spindle, the I.D. of the collector manifold ports, the number of ports, and the exact length of each hose.
When STAT-VAC is coupled to a properly grounded manifold such as STAT-MAN or a Sierra Polymer
modified Prima, a resistive ground is achieved directly to the machine frame ground. To insure proper
grounding of STAT-VAC, the manifold must be properly grounded. Continuity between the collector manifold
and the machine frame ground must be checked before using the machine.
|
SELECTOR CHART
STAT-VAC & STAT-VAC1.1 VACUUM HOSE KITS
Part |
|
Pressure Foot |
STAT-VAC Hose |
|
Tie |
Number |
Systems |
Adaptor I.D. |
O.D. |
I.D. |
STAT-VAC Hose Kits |
Wraps |
STAT-VACK5S |
5 Spindle Kits |
Standard |
S |
0.687 |
0.875 |
0.687 |
2 @ 52", |
2 @ 45", |
1 @ 42" |
7 |
STAT-VACK5B1.1 |
5 Spindle Kits |
Broken Bit |
B |
0.750 |
1.062 |
0.875 |
2 @ 52", |
2 @ 45", |
1 @ 42" |
7 |
STAT-VACK5S1.1 |
|
Standard |
S |
0.687 |
1.062 |
0.875 |
2 @ 52", |
2 @ 45", |
1 @ 42" |
7 |
STAT-VACK4S |
4 Spindle Kits |
Standard |
S |
0.687 |
0.875 |
0.687 |
2 @ 50", |
2 @ 45" |
|
6 |
STAT-VACK4B1.1 |
4 Spindle Kits |
Broken Bit |
B |
0.750 |
1.062 |
0.875 |
2 @ 50", |
2 @ 45" |
|
6 |
STAT-VACK4S1.1 |
|
Standard |
S |
0.687 |
1.062 |
0.875 |
2 @ 50", |
2 @ 45" |
|
6 |
STAT-VACK3S |
3 Spindle Kits |
Standard |
S |
0.687 |
0.875 |
0.687 |
2 @ 45", |
1 @ 42" |
|
5 |
STAT-VACK3B1.1 |
3 Spindle Kits |
Broken Bit |
B |
0.750 |
1.062 |
0.875 |
2 @ 45", |
1 @ 42" |
|
5 |
STAT-VACK3S1.1 |
|
Standard |
S |
0.687 |
1.062 |
0.875 |
2 @ 45", |
1 @ 42" |
|
5 |
STAT-VAC1.5 |
STAT-MAN |
Collector |
Hose |
|
1.75 |
1.50 |
Order by # of ft. |
|
STAT-VAC2.0 |
STAT-MAN |
Collector |
Hose |
|
2.25 |
2.00 |
Order by # of ft. |
|
|
Distributed By:
|
 |
|